Bashsea Pellet Master

The design of the pellet master series is not your standard pellet reactor design. Unlike a lot of reactors seen in the hobby, there are no foam pads. This means there is nothing to get clogged up and no consumable parts in the reactor itself. Instead of using sponge pads, the reactor uses a fine-tooth screen that can be removed for cleaning when needed.
The teeth on this screen are close enough together to keep most media from escaping, but also spaced far enough apart to keep the water flow sufficient enough to tumble the pellets. And since the biopellets dissolve as they are being used, the lack of a foam pad is actually desirable as the media bacteria leftovers can escape the reactor and be skimmed off.
The base plate merely had a single row of holes. The outermost pellets get pushed upward, causing the rest of the pellets to be drawn into the current. This circular water flow, allows the pellets to be moved around rather violently.

Categories: ,

Description

Bashsea Pellet Master PM1 

  • 9.25″ Tall. Chamber: 5.5″ diameter.
  • Start with at least 50ml of media
  • Requires a 750 to 1500 lph pump
  • 1/2″ hose barb inlet/outlet
  • For tanks up to 600 liters

Bashsea Pellet Master PM2 

  • 13″ Tall. 5.5″ diameter
  • Start with at least 100ml media
  • Requires 750lph to 1500lph
  • 1/2″ hose barb inlet/outlet
  • For tanks up to 1100 liters

Bashsea Pellet Master PM3 

  • 15-1/2” Tall.
  • Start with at least 500ml of media
  • Requires 2000lph to 5000 lph
  • 3/8″ hose barb inlet/outlet
  • For Tanks up to 2250 Liters

Reviews

There are no reviews yet.

Be the first to review “Bashsea Pellet Master”

Your email address will not be published. Required fields are marked *

This is a demo store for testing purposes — no orders shall be fulfilled. Dismiss